Artwork information 3D stickers, Ø 1.5 cm, 4/0 colours
- Data format (incl. 2 mm bleed): 1,9 x 1,9 cm
- Trimmed size: 1,5 x 1,5 cm
- Special requirements for creating the artwork:
- Please observe the following for transparent stickers/films:
- white elements cannot be printed
- the lighter the print colour, the more transparent does the film seem
- the motif is printed right-reading (self-adhesive side on the reverse of the motif)
- if a motif is applied to the inside of a window to be seen from the outside, the print files must be created as mirror image
- Please observe the following for transparent stickers/films:
- Resolution: 300 dpi
- Include a surrounding trim of 2 mm, important information should be at least 3 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Comments will be deleted and not printed
- Form field content will be printed
Product details
- Four-colour print on the front, reverse blank (4/0)
- vibrant appearance and additional doming protective artificial resin coat
- scratch- and abrasion-resistant
- highly durable thanks to protective coating; print does not fade even under frequent UV light
- particularly well-suited for surfaces where stickers do not adhere easily, such as PE or PP
- Note: the surface must be free from dust, grease, or other substances that could impair the adhesive strength of the material. Freshly painted surfaces must have dried/cured completely.