Artwork information Pinback buttons, round, Ø 2.5 cm
- Data format: 3,5 x 3,5 cm
- Trimmed size: 2,5 x 2,5 cm
- Special requirements for creating the artwork:
- The buttons can only be attached horizontally. We will always turn your artwork according to the text direction to make sure your design is not upside down.
- font size: at least 8 pt.
- Maintaining %s [m] space between the text/information and the edge of the trimmed format prevents undesirable cuts.
- Resolution: 300 dpi
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Comments will be deleted and not printed
- Form field content will be printed
Product details
- Four-colour print on the front, reverse blank (4/0)
- Sheet metal badges to fasten by means of a pin on the back
- The front has a glossy or matt film lamination
- Make sure to add 5 mm bleed on all sides of your artwork in addition to the final dimensions.
- For round designs, we recommend buttons from 37 mm as such designs may appear off-center on 25 mm buttons due to the production process.
- Only one motif can be uploaded for each print order.
Excellent from James Mchugh
Excellent from Lee Faichney
We use Trustpilot as an independent service provider for obtaining reviews. If you want to know which measures Trustpilot takes to ensure that the reviews are genuine, click here.