Artwork information Hinged lid boxes with tear notch
- free format selection
- Special requirements for creating the artwork:
- The print design must protrude 3 mm into the inner edge of the adhesive flap (overfill); the rest of the adhesive flap must remain unprinted.
- Black elements must be created with 100 % black only (e.g. barcodes such as EAN, QR-codes, text etc.)
- Resolution: 300 dpi
- Include a surrounding trim of 3 mm, important information should be at least 4 mm from the edge of the final format size
- Fonts must be completely imbedded or converted to curves
- colour mode: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper
- We will not check for spelling and/or typographical errors
- We will not check for overprint settings
- Comments will be deleted and not printed
- Form field content will be printed
Print templates
Product details
- Four-colour print on the front, reverse blank (4/0)
- hinged lid boxes with large opening, ideal for flat products
- with click closure on the inside and tuck flap on the outside; no glue needed
- easy to open thanks to a large lid
- design: FEFCO 0427
- corrugated cardboard is primarily made of waste paper – lower consumption of resources, energy and water
- 100 % recyclable and eco-friendly
- resistant to humidity and temperature fluctuations thanks to high-quality cardboard
- delivered flat, not assembled
- How to assemble:
- 1) Fold up the front and rear panel,
- 2) folding their lateral flaps inwards to form a frame.
- 3) Put the side panels over and press them into the slots inside the box.
- 4) Fold the large flaps on the lid inwards and push them into the box.
- 5) Insert the closing flap, i.e. the small flaps on the lid, into the openings of the side panels.
- Please observe the data sheet.
Excellent from James Mchugh
Excellent from Lee Faichney
We use Trustpilot as an independent service provider for obtaining reviews. If you want to know which measures Trustpilot takes to ensure that the reviews are genuine, click here.